GS21122 BoogieMan™ Composite Intake Gaskets

BoogieMan™ Composite Intake Gaskets

Recommended for use with wide-port BoogieMan™ heads and / or intakes.

Won’t come apart when wet.

High quality composite gasket material. Safe for aluminum heads and intakes.

Color may vary.

For iron heads or non-BoogieMan aluminum heads, order GS21112

Made in USA

These gaskets are intended to be installed dry (no sealer needed on the gaskets). You may use a light mist of gasket adhesive, to help hold them in place if needed, but anything else is far more likely to cause a leak, than to prevent one.  We recommend a bead of silicone to seal the intake to the block, across the front and back of the engine. Be sure to get silicone under the corner of the head at each end of these seals.